Manufacturer

Tu Yi Industrial Technology (Shanghai) Co., Ltd.

Tuyi Industrial Technology (Shanghai) Co., Ltd. was founded in 2014. It is mainly engaged in the coating business of automobiles and parts in the four major processes of the automobile manufacturing industry. At the same time, it is also working hard to expand the welding and final assembly business, integrating the preliminary plan and consultation of the project., Design, manufacture, installation and commissioning are a technical enterprise. Technology can cover the entire painting workshop-including pretreatment, electrophoresis, spray booth, air conditioning, drying room, waste gas treatment and other process equipment, as well as automated conveying systems and robotic spraying systems.

Product features:

As an important process for anti-corrosion of the body cavity, after painting and before assembly, wax spraying technology is often used to spray wax into the body cavity. After spraying, infrared heating is required, and one end of the body together with the roller bed is tilted and pulled up. On the one hand, the water or solvent in the cavity can be quickly evaporated, and on the other hand, the wax can flow evenly in the cavity, and the excess wax can flow out. Avoid dripping along the way.

Wax spray after baking is suitable for: water-based wax, solvent-based wax, pure wax

The use of infrared short-wave heating can make the body heat up in a shorter time (one minute can reach the preset temperature), and achieve a perfect balance between energy saving and high efficiency.

The baking after wax injection does not need to heat the whole body, and the equipment only acts on the part that needs to be heated, which not only saves energy efficiency, but also improves the curing effect of wax.

The roast light will only be turned on when there is a car body passing by and needs to be heated, and turned off when there is no car body passing by, saving energy consumption.

Using infrared baking heating method, according to the production rhythm, only one station or two stations need to install infrared heating equipment. The traditional hot air convection heating method requires several times the length of the drying room to heat, on the one hand, the energy consumption is very high, on the other hand, the need for regular maintenance and maintenance.

From the installed engineering examples, it can be verified that the use of infrared baking heating after wax spraying is a very efficient, environmentally friendly and energy-saving solution.

Product introduction:

As an important process for anti-corrosion of the body cavity, after painting and before assembly, wax spraying technology is often used to spray wax into the body cavity. After spraying, infrared heating is required, and one end of the body together with the roller bed is tilted and pulled up. On the one hand, the water or solvent in the cavity can be quickly evaporated, and on the other hand, the wax can flow evenly in the cavity, and the excess wax can flow out. Avoid dripping along the way.

Wax spray after baking is suitable for: water-based wax, solvent-based wax, pure wax

The use of infrared short-wave heating can make the body heat up in a shorter time (one minute can reach the preset temperature), and achieve a perfect balance between energy saving and high efficiency.

The baking after wax injection does not need to heat the whole body, and the equipment only acts on the part that needs to be heated, which not only saves energy efficiency, but also improves the curing effect of wax.

The roast light will only be turned on when there is a car body passing by and needs to be heated, and turned off when there is no car body passing by, saving energy consumption.

Using infrared baking heating method, according to the production rhythm, only one station or two stations need to install infrared heating equipment. The traditional hot air convection heating method requires several times the length of the drying room to heat, on the one hand, the energy consumption is very high, on the other hand, the need for regular maintenance and maintenance.

From the installed engineering examples, it can be verified that the use of infrared baking heating after wax spraying is a very efficient, environmentally friendly and energy-saving solution.

Application areas

1. Local point repair in painting/assembly workshop (floor/hanging type)

2. Large area repair in painting/assembly workshop (channel type)

3. Black roof process in painting workshop

4. Threshold glue process of painting workshop

5. Baking after wax injection in coating workshop

6. Other supplementary baking stations in painting/assembly workshop

7. Baking products in other industries

Use of the site